Premise 200 SC 50ml for Ants

Description

Premise 200 SC is a non-repellent and systemic insecticide with a unique chemistry that provides effective termite and ant control in buildings and other structures.

Premise 200SC is a termiticide that provides immediate protection from termites. Termites are eliminated as they ingest or contact Premise in a treated soil area around the perimeter of a building or other timber structures.

It has built a solid reputation as a reliable long-term termite control product with virtually no serious problems encountered in the marketplace since its release in the USA.

Premise 200 SC Key Product Facts

• Active ingredients: Imidacloprid (Chloro-nicotinyl) 200gm/ltr
• Minimum 5 years of structural protection.
• Proven termite protection.
• Excellent all-around value.
• Zero complaints.
• Long-term termite protection.
• No odor.
• Recommended by architects for new buildings and large projects.
• Unique colony management – to provide maximum estate protection.
• Suspension concentrate.
• For the protection of buildings against subterranean wood-destroying termites and ants.
• Non-repellent termiticide with transfer effect.

Packaging

Availlable in 50ml packages.

Mix 50ml of Premise 200 SC per 20 liters (or 13ml to 25ml in 10 liters) of water then apply the 5 liters of the mix per 1 square meter or linear meter. Spray or paint the surface of dried timber or soak in the mixture for 30 minutes. Spray the solution onto the foundation or below the floor surface before installing slabs at 5 liters per square meter or linear meter. Drill holes 50 cm apart along the wall, and 15 cm away from the wall. Pump into each hole 5 – 6 liters of the solution.

Note: Use a higher concentration rate for longer protection. At a rate of 13ml, Premise 200 SC provides protection for 2 years and protection for 5 years at a rate of 25ml.

Residual Action

Premise 200Sc has a residual action of up to 5 years.

Where to Use Premise

1. Pre- and Post-Construction Treatment
2. Road Construction
3. Airport Runway
4. Construction Perimeter Treatment
5. Termite Mounds

What Premise 200 SC Controls

1. Ants
2. Subterranean Termites
3. Drywood Termites
4. Formosan Termites

Premise Application Rates

Before using this product read the label carefully.

Ants:

•  Nest Treatment: 0.5 ml / 0.5 l water / nest entrance

Termites:

• Pre-construction: 125 ml / 100 l water
• Post-construction (conventional treatment): 125 ml / 100 l water
• Post-construction (perimeter treatment):250 ml / 100 l water
• Road & runway construction: 125 ml / 100 l water
• Treatment existing colonies: 6.25 ml / 5 l water / nest

Why you should Buy Premise

Non-repellant

The premise works quite differently from other termiticide soil treatment products which are designed to repel or keep termites away from a treated soil area, rather than killing them.
With “repellant” termiticides, any minute a gap in the treated soil can be detected and exploited by the termites to gain entry into the building. This is a major shortcoming of the old-fashioned termite control alternatives, far too often, with financially disastrous consequences.

Odorless

Termites cannot detect the Premise chemical as it has no odor, taste, or smell to the termites.

Recent termite control analysis

Bayer found more than 99% of buildings treated by Premise required absolutely NO re-treatment throughout a 5-year period following the initial treatment, with no serious re-infestation problems or failure of the product’s effectiveness.
This is an outstanding result given the tenacity of termite species and the wide variation in technical skills of applicators, climatic conditions, soil compositions, and building construction types.
Bayer claim “there is no technical or commercial reason to use any termiticide other than Premise”. The results tend to speak for themselves.

Long-term ongoing termite elimination

As with any termite control program, your property always remains susceptible to future attacks from new termite colonies or other established colonies in your area.
The good news for the homeowner is that the Premise soil treatment chemical will remain in place without washing away for many years even after the existing attack on your property has been eliminated.

Premise eliminates termites in three important ways.

Because the Premise works in more than one way, it eliminates individual termites and targets the termite colony. First, foraging termites ingest Premise in the soil as they tunnel from their home to yours. Second, termites contact Premises as they forage in treated soil. Third, since the Premise is carried back to the colony by termites that have entered the Treated Zone, a lethal dose can be transferred to other termites through social interaction and cannibalism. Termites live in colonies and constantly interact with
each other, and Premise uses these traits against them to protect your home.

How to use Premise 200

Fill half the tank with clean water before mixing Premise® 200 SC according to recommended dilution rate. Add the required balance of clean water and stir. Do not use any rate that is higher than what is recommended on the product label. Do not apply Premise® 200 SC in the rain or when it is going to rain.

Timing

• Premise 200 can be applied during pre or post-construction, or as a treatment to control termite infestation.

Safety instructions

• Always read the product label before use.
• Keep out of reach of children.
• Do not use any rates other than those recommended on the product label.
• Harmful if swallowed.
• Avoid inhaling vapor or spray mist.
• Avoid contact with skin or eyes.
• Wear protective clothing including gloves while handling this product.
• Do not eat, drink, or smoke while handling the product.
• Do not store near fire or under direct sunlight or in a place where the temperature is more than 40°C.
• Wash all application equipment after use.

Downloads Related to Premise 200 SC

Premise 200 SC Material Safety Data Sheet

Premise 200 SC Label

Premise 200 SC Brochure

Premise 200 SC Application Rate

Premise Protection Zone